Image à venir122117-5Précision dans chaque couche
La filtration fiable commence avec des spécifications vérifiées.
La filtration fiable commence avec des spécifications vérifiées.
122117-5
Air Compressor Filter Elements replacement element
Éléments de filtre du compresseur d'air
122117-5 is an industrial-grade screw air compressor air/oil separator, designed to maintain high purity of the compressed air system.It is mainly installed in the air-oil separation tank of Quincy…
Type de fournitureRemplacement indépendant du marché secondaire
DisponibilitéDisponible
Délai de mise en œuvre2 à 3 jours ouvrables
Se référencerÀ confirmerAucun renvoi n'a été ajouté
Prix de référence · taxe comprise
Demander un devis
Les commandes sont confirmées par notre équipe pour le prix, la compatibilité et la livraison.
Livraison flexiblePrise en charge des points de service
Spécifications vérifiées pour une sélection sûre.
Confirmer les exigences d'installation en fonction du manuel de l'équipement ou de la documentation originale.
| Hauteur | 435mm |
|---|---|
| Diamètre extérieur | 462mm |
| Inner diameter | 277mm |
| Poids | 15.2kg |
| Précision de filtration | 0,1 mm |
Les dimensions sont indicatives, pas un dessin technique.
122117-5 is an industrial-grade screw air compressor air/oil separator, designed to maintain high purity of the compressed air system.
It is mainly installed in the air-oil separation tank of Quincy high-pressure or large-displacement screw air compressors and serves as a core consumable component of the compressed air purification system.
Core Functions
• Efficient Oil-Gas Separation: Adopts advanced ultra-fine glass fiber coalescence technology to intercept, coalesce and separate suspended oil mist entrained in compressed air.
• Reduced Lubricating Oil Consumption: Efficiently recovers lubricating oil and guides it back to the compressor oil circulation system, significantly mitigating oil carryover of the air compressor.
• Downstream Equipment Protection: Controls residual oil content in exhaust at an extremely low level (1–3 ppm) to prevent oil contamination of main pipelines, dryers, precision filters and terminal pneumatic components.
Caractéristiques du produit
• High-Precision Filtration: Boasts a filtration accuracy of 0.1μm, ensuring discharged compressed air is clean and free of oil mist contamination.
• Heavy-Duty Structural Design: Features a corrosion-resistant thickened aluminum or galvanized steel housing (net weight: 15–29 lbs) with outstanding pressure and deformation resistance to prevent filter element collapse under high pressure differentials.
• Low Pressure Drop: Maintains minimal system pressure loss while achieving a separation efficiency of over 99%, thereby cutting energy consumption of the air compressor.
• Extra-Long Service Life: Designed for an operational lifespan of 4,000 to 4,500 hours under standard working conditions and good oil quality.
Notes d'installation
Inspect the Scavenge Line: When replacing a new filter element, the length of the scavenge line and the check valve must be inspected. The scavenge line must reach the central gasket at the bottom of the separation core (typically 1–2 mm from the bottom), and the line tip must not be blocked. If the scavenge line is too short or blocked, the separated oil cannot drain away, which will cause severe oil carry-over failure. • Static Grounding for Spark Elimination: The interior of the oil-gas separator tank is a high-pressure flammable environment. During installation, ensure the graphite gasket ring or Grounding Staples on the top of the filter element are intact and make firm contact with the metal surface of the separator tank. Do not scrape off the gasket or remove the grounding staples without authorization; otherwise, static sparks may trigger an internal explosion of the tank. • Lubricant Application: When installing the sealing gasket of a new filter element, apply a thin coat of clean air compressor lubricant on its surface to guarantee sealing performance and prevent air bypass leakage.
Maintenance & Replacement
Monitor Differential Pressure: This is the most scientific basis for judging the condition of the filter element. When the differential pressure before and after the separator reaches 0.08 MPa to 0.1 MPa (approximately 12–15 PSI or 1 bar), it indicates that the filter element is severely clogged and must be replaced immediately. Failure to do so will cause a sharp rise in the energy consumption of the air compressor, or even the collapse of the filter element due to high differential pressure. • Scheduled mandatory replacement: Even if the differential pressure has not reached the critical value, mandatory replacement shall be carried out once the operating hours reach 4000 hours (reduce to 3000–3500 hours under harsh environmental conditions) or after one year of service. • Abnormality troubleshooting: If excessive oil separation is observed in the rear main pipeline, the air storage tank requires frequent oil drainage, or the consumption rate of air compressor lubricating oil increases abnormally, first check whether the 122117-5 filter element is broken through or failed.
Avant de commander
Confirmer le milieu, le débit, la pression, la température, le raccordement et l'espace d'installation disponible.
Options de livraison
Ramassage de points d'expédition ou de service. Notre équipe confirme le meilleur arrangement en fonction de la destination, du poids et des délais.
Confirmé avant expédition
Après enquête, nous vérifions les spécifications, le prix et l'état de la fourniture avant la livraison.
Appui continu
Pour des questions de spécifications, d'installation ou de qualité, gardez le produit et les informations de commande disponibles lors de notre contact.
ENQUÊTEEnvoyer une demande pour ce produit
Send your requirements for 122117-5 and our selection team will confirm compatibility, price and lead time.
Questions fréquemment posées
Comment puis-je confirmer la compatibilité sans référence de marque tierce ?
Indiquer le numéro de produit, les dimensions, les détails de connexion, les conditions de fonctionnement et les informations sur l'équipement. Notre équipe confirmera la demande.
Quelles dimensions dois-je mesurer?
Mesurer la hauteur totale, le diamètre extérieur, le diamètre intérieur et la taille du fil ou de la connexion. Une photo ou un dessin permet de confirmer le remplacement.
Comment puis-je choisir le bon matériau d'étanchéité?
La sélection des joints dépend du milieu de filtration, de la température de fonctionnement et de la compatibilité chimique. Nous pouvons confirmer les options appropriées pour votre application.
Can you provide a product data sheet?
Yes. Send the product number and required specifications and we will provide the available data sheet and selection support.
