
La filtration fiable commence avec des spécifications vérifiées.
Air-Oil Separator Element 1503-F5-10
Air Compressor Filter Elements replacement element
Éléments de filtre du compresseur d'air
The 1503-F5-10 built-in oil-gas separator filter element is a high-efficiency coalescing filter component specially designed for screw air compressors. It is mainly used for deep separation and…
Les commandes sont confirmées par notre équipe pour le prix, la compatibilité et la livraison.
Spécifications vérifiées pour une sélection sûre.
Confirmer les exigences d'installation en fonction du manuel de l'équipement ou de la documentation originale.
| Hauteur | 200 mm |
|---|---|
| Diamètre extérieur | 135 mm |
| Diamètre intérieur | 75 mm |
| Poids | 1.60 kg |
| Diamètre extérieur du Flang | 170 mm |
| Cote de filtration | 0,1 μm |
| OEM / Référence croisée | OS-2101,1503F510 |
The 1503-F5-10 built-in oil-gas separator filter element is a high-efficiency coalescing filter component specially designed for screw air compressors. It is mainly used for deep separation and recovery of lubricating oil mist in compressed air, ensuring the cleanliness of the output air source and stable operation of the unit.
Core Advantages and Process Features
• High-precision and high-efficiency separation.
Adopting imported ultra-fine borosilicate glass fiber composite material, it achieves a filtration accuracy of 0.1 µm and a separation efficiency of over 99.9%. The oil content in exhaust gas can be strictly controlled within 3 ppm, greatly reducing lubricating oil consumption and oil contamination in downstream pipelines.
• Low-resistance and energy-saving design.
The optimised folded corrugated structure increases the effective filtration area, with an initial pressure differential as low as ≤ 0.02 MPa. It effectively cuts the power consumption during unit loading and extends the continuous operation cycle (with a design service life of approximately 3,500 – 5,200 hours).
• High-strength and safe structure.
Perforated support frames made of anti-corrosion galvanized steel sheets and thickened flange end caps are fitted both internally and externally, delivering strong pressure-difference resistance and resistance to collapse and deformation. Static-conducting earthing pins are built into the upper and lower gaskets to promptly discharge static electricity generated by high-speed friction of oil and gas, eliminating static safety hazards inside the oil-gas separator tank.
• High-temperature resistance for harsh working conditions.
High-temperature resistant materials are used for end cap bonding and sealing components, enabling long-term leak-proof sealing under high temperatures of 110℃ – 120℃ and operating pressures of 0.7 – 1.6 MPa.
Notes d'installation
Arrêter le système et relâcher la pression avant le retrait. Confirmer la direction d'écoulement et les surfaces d'étanchéité avant l'installation.
Maintenance & Replacement
Remplacer selon la chute de pression ou le calendrier d'entretien. Inspecter les fuites et les dommages aux joints.
Avant de commander
Confirmer le milieu, le débit, la pression, la température, le raccordement et l'espace d'installation disponible.
Options de livraison
Ramassage de points d'expédition ou de service. Notre équipe confirme le meilleur arrangement en fonction de la destination, du poids et des délais.
Confirmé avant expédition
Après enquête, nous vérifions les spécifications, le prix et l'état de la fourniture avant la livraison.
Appui continu
Pour des questions de spécifications, d'installation ou de qualité, gardez le produit et les informations de commande disponibles lors de notre contact.
ENQUÊTEEnvoyer une demande pour ce produit
Send your requirements for 1503-F5-10 and our selection team will confirm compatibility, price and lead time.
Ressources de sélection
Need help confirming 1503-F5-10 or comparing it with another reference? Use these selection resources before ordering.



